20 DECEMBER 83
(Supersedes LO 5-3895-320-12-1, and -2, 10 MAY 1968)
DRYER, AGGREGATE, DIESEL ENGINE DRIVEN,
4-WHEEL MOUNTED (BARBER-GREENE MODEL DA-60)
(BARBER-GREENE MODEL 881)
MIXING PLANT, ASPHALT, 100 TO 150-TON
Reference: TM 5-3895-320-15 and FEDERAL SUPPLY CATALOG C9100-IL.
Clean parts or fittings with dry cleaning solvent
Hard time intervals and the related man-hour times
(SD), Type II or equivalent. Dry before lubricating.
are based on normal operation. The man-hour
Dotted arrow shafts indicate lubrication on both
time specified is the time you need to do all the
sides of equipment. A dotted circle indicates a
services prescribed for a particular interval.
Relubricate all items found
Change the hard time interval if your lubricants are
contaminated after fording or washing.
contaminated or if you are operating the
equipment under adverse operating conditions,
The lowest level of maintenance authorized to
including longer than-usual operating hours. The
lubricate a point is indicated by one of the
hard time interval may be extended during periods
following symbols as appropriate: Operator/Crew
of low activity. If extended, adequate preservation
(C); and Organizational Maintenance (O).
precautions must be taken.
You can help improve this
manual. If you find any mistakes, or if you know of
Dry cleaning fluid is flammable. Do not use near a
a way to improve the procedures, please let us
flame or excessive heat. Use only with adequate
Mail your letter or DA Form 2028
ventilation. Avoid prolonged breathing of vapors
(Recommended Changes to Publications and
and minimize skin contact.
Blank Forms) direct to: Commander, US Army
Tank-Automotive Command, ATTN: DRSTA-MB,
Warren, MI 48090. A reply will be furnished to
*The time specified is the time required to perform all services at the particular interval.
LO 5-3895-320-12 CARD 1 OF 6