TM 10-3990-205-12&P
3-5 SWING BOLT AND/OR CONTROL ROD REPLACEMENT - CONT
General Safety Instructions
- CONT
Materials/Parts
-
continued
BOLT, MACHINE, SWING,
214A-35
The spreader shall be firmly
BOLT, MACHINE, SWING,
supported on timbers or blocks
214A-44
to
avoid possible injury to
Grease
personnel.
MIL-G-10924
Remove and discard the cotter
1.
pin (1). Lift the swing bolt (2)
off the clevis pin (3).
Remove and discard the cotter
2.
pin (4). Remove the clevis pin
(5), to disconnect the swing bolt
(6) from the cam (7).
Remove the control rod (8)
3.
and
swing
bolts
(2
and
6)
as an assembly.
1.
Loosen the nut (9) and unscrew
and remove the swing bolt
(2) from the control rod (8).
2.
Remove
the
nut
(9)
from
the swing bolt (2).
Loosen the nut (10) and unscrew
3.
a n d r e m o v e t h e s w i n g bolt
(6) from the control rod (8).
4.
R e m o v e the
nut
(10)
from
the swing bolt (6).
3-9