TM 10-3990-205-12&P
3-8 REPLACE ALIGNMENT ARM AND COMPONENTS - CONT
-
CONT
ALIGNMENT ARM ASSEMBLY
2.
Position the rubber bumper (1) on the frame (2) and install the screw (3).
a.
Insert the eyebolt (4) through the mounting bracket and install the lockwasher
b.
(5) and nut (6).
Install the nut (7) on the capscrew (8) and insert the capscrew through the
c.
hole in the alignment arm (9). Install the nut (10) on the capscrew (8). and
tighten the nut (7).
Install the pin (11) in the pivot pin (12).
d.