Section I. OPERATING PROCEDURES
If equipment fails to operate, refer to
troubleshooting procedures in chapter 3.
2-1. Operating Procedures
a. Back the truck to the spreader. Extend the
balancing handles and hold the spreader in a level position.
By operating the spreader hitch adjusting crank, (fig. 1-1)
raise or lower the spreader hitch to meet the tow hitch on
the truck. The spreader will hitch and lock when the truck is
backed into it.
Stand clear of the spreader tow hitch while
the towing vehicle is backing for a hookup.
Make certain towing vehicle is stopped and
the shifter level is in neutral before making