TM 5-3895-367-14&P
(3)
Remove left side of agitator pipe assembly (8)
through left side of spreader.
(4)
On right side of spreader, remove nut (10), and
screw (11) securing sprocket (12) to pin (13).
Remove sprocket.
(5)
Remove three nuts (14), lockwashers (15), and
screws (16) securing bearing (17) to spreader.
Remove bearing. Discard lockwashers.
(6)
Inside hopper, remove locknut (18) and screw
(19) securing right side of agitator pipe assembly
(20) to bushing (9). Discard locknut.
(7)
Remove right side of agitator pipe assembly
(20) through right side of spreader.
5-15