INSTALLING AND REMOVING TRUCK HITCH.
This task covers:
Tool Kit, General Mechanics Automotive
Personnel Required: Two
Installing Truck Hitch on Dump Truck.
Remove four nuts (1), flatwashers (2), and bolts
(3) stowed on truck hitch (4).
If spreader Is used with M51A2, M817,
M929, or M930 dump truck, perform
steps (2) and (15). If spreader is used
with M929A1, M929A2, M930A1, or
M930A2 dump truck, perform steps
(3) through (15).
Install truck hitch (4) on rear crossmember of
dump truck using four bolts (3), flatwashers (2),
new lockwashers (5), and nuts (1). Tighten truck
hitch mounting bolts to 60 lb-ft.
Stow mounting bolts (3) removed from truck
hitch (4) in spreader toolbox.