NOTES -CONTINUED:
tom of level plug. Change gear lubricant only when
by water or other foreign material. After refill, operate
for 5 minutes, check for leaks and bring oil to "FULL"
mark.
5. CHARGING CHUTE SPEED REDUCER.
Each 50 hours check level. Change gear lubricant only
when required by maintenance repair action, or
After refill, operate for 5 minutes, check for leaks and
bring oil to "FULL" mark.
6. DRUM DRIVE CHAIN OILER. Each 10 hours check
level. Adjust oiler to drip 2 drops of oil per minute.
Each 50 hours flush drive chain with 4 quarts (3.8 L) of
OE/HDO. Rotate dryer for ten minutes after flushing.
7. HEAD SHAFT GEAR BOX. Each 50 hours check
level. Maintain level to bottom of level plug. Change
gear lubricant only when required by maintenance
repair action, or when contaminated by water or other
foreign material. After refill, operate for 5 minutes,
Copy of this Lubrication Order will remain with the
check for leaks and bring oil to "FULL" mark.
equipment at all times, instructions contained herein are
mandatory.
8. LUBRICANTS. The following is a list of lubricants
with military symbols and applicable specification
By order of the Secretary of the Army:
numbers.
JOHN A. WICKHAM, JR.
OE/HDO
MIL-L-2104
General, United States Army
GO
MIL-L-2105
Chief of Staff
GAA
MIL-G-10924
OEA
MIL-L-46167
(SD), Type II
P-D-680
OFFICIAL:
ROBERT M. JOYCE
Major General, United States Army
The Adjutant General
DISTRIBUTION:
To be distributed in accordance with DA Form 12-25B,
Operator and Organizational maintenance requirements
for , Aggregate Dryers.
TA 220122
LO 5-3895-320-12
U.S. GOVERNMENT PRINTING OFFICE: t1 O-75596 CARD 6 OF 6