Key to figure 4-3
d. Inspection. Inspect the agitator assembly to
1 Shaft (RH)
insure that it is not bent or broken.
2 Collar
e. Repair or Replacement. Repair or replace any
3 Setscrew
broken or badly worn parts.
4 Agitator shaft (RH)
f. Reassembly.
Reassemble the agitator
6 Bearing
assembly in the reverse order of the disassembly.
6 Bolt
g. Installation. Install the agitator assembly as
7 Lockwasher
described in paragraph 3-5.
8 Nut
9 Shaft (Center)
10 Agitator shaft (LH)
11 Bolt
12 Lockwasher
13 Nut
14 Shaft (LH)
4-3
