TM 5-3895-367-14&P
APPENDIX F
REPAIR PARTS AND SPECIAL TOOLS LIST
Section I. INTRODUCTION
F-1. SCOPE.
This RPSTL lists and authorizes spares and repair parts;
special tools; special test, measurement, and diagnostic
equipment (TMDE); and other special support equipment
required for performance of unit, direct support, and
general support maintenance on the aggregate spreader.
It authorizes the requisitioning, issue, and disposition of
spares, repair parts, and special tools as indicated by the
source, maintenance, and recoverability (SMR) codes.
F-2. GENERAL.
In addition to Section I, Introduction, this RPSTL is
divided into the following sections.
a.
Section 11-Repair Parts List. A list of spares
and repair parts authorized by this RPSTL for use in the
performance of maintenance. The list also includes
parts that must be removed for replacement of the
authorized parts. Parts lists are composed of functional
groups in ascending figure and item number sequence.
Bulk materials are listed by item name in FIG BULK at
the end of the section. Repair parts kits or sets are listed
separately in their own functional group within Section II.
Repair parts for repairable special tools are also listed in
the section.
b.
Section Ill-Special Tools List. A list of special
tools, special TMDE, and other special support
equipment authorized by this RPSTL (as indicated by
Basis of Issue (BOI) information in DESCRIPTION AND
USABLE ON CODE (UOC) column) for the performance
of maintenance.
c.
Section IV-Cross-reference Indexes. A list, in
national item identification number (NIIN) sequence, of
all national stock numbered items appearing in the
listings, followed by a list in alphanumeric sequence of all
part numbers appearing in the listings. National stock
numbers and part numbers are cross-referenced to each
illustration figure and item number appearance. The
figure and item number index lists figure and item
number
in alphanumeric sequence and cross-references NSN,
CAGEC, and part number.
F-3.
EXPLANATION OF COLUMNS (SECTIONS II
AND III).
a.
Item No. (Column (1)). Indicates the number
used to identify items called out in the illustration.
b.
SMR Code (Column (2). The source,
maintenance, and recoverability code is a 5-position
code containing supply/requisitioning information,
maintenance category authorization criteria, and
disposition instruction, as shown in the following
breakout::
* Complete repair: Maintenance capacity, capability, and
authority to perform all corrective maintenance tasks of
the "repair" function in a use/user environment in order to
restore serviceability to a failed item.
(1)
Source Code. The source code tells you how to
get an item needed for maintenance, repair, or
overhaul of an end item/equipment. Explanation
of source codes follows:
F-1
