TM 5-3895-367-14&P Table 4-1.  UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) M - Monthly Q-Quarterly A-Annually ITEM INTERVAL ITEM TO BE NO. M Q A INSPECTEDPROCEDURE NOTE Perform operator PMCS prior to or in conjunction with unit PMCS. 1 • Transport truck and Inspect for cracks, breaks, bends, and broken welds.  Repair or re- tongue place as required (para 4-18 or 4-23). 2 • Transport wheels Inspect for cracks, breaks, or bends.  Replace any defective parts (para 4-19 or 4-20). 3 • Transport wheel Remove bearings (para 4-20).  Clean, inspect, and pack in accor- bearings dance with TM 9-214. 4 • Coupler hitch Inspect for cracks, breaks, or damaged hardware.  Report deficien- cies to direct support maintenance. 5 • Control levers and Check all levers and linkages for proper operation.  Replace as re- linkages required (para 4-29 through 4-32). 6 • Hopper Inspect for cracks, breaks, or broken welds.  Report deficiencies to direct support maintenance. 7 • Agitator Inspect for cracks, broken vanes, or other damage.  Report deficien- cies to direct support maintenance. 8 • Chains and Inspect for cracked or broken links.  Replace defective chains (paras sprockets 4-39 and 4-38).  Inspect sprockets for chipped or cracked teeth.  If feed roll drive shaft sprocket is damaged, replace (para 4-39).  If any other sprocket is damaged, notify direct support maintenance. 9 • Feed roll bearings Ensure that bearings turn easily and sha ft is not bent.  Report defi- and shaft ciencies to direct support maintenance. 10 • Balance roller Ensure that balance roller turns easily and is not bent or broken.  Re- place or repair defective balance roller (para 4-40). 11 • Traction wheels Inspect for cracks, breaks, or bends.  Replace any defective parts (para 4-41). 12 • Traction wheel Ensure that axles turn freely and are not bent or broken.  Replace de- bearings and axles fective axles or bearings (para 4-41). 4-3