TM 5-3895-367-14&P
5-4. AGITATOR REPAIR (CONT).
(21)
Install bushing (17) on right side of spreader
using three screws (16), new lockwashers (15),
and nuts (14). Tighten bushing mounting screws
to 60 lb-ft.
(22)
Install sprocket (12) on end pin (13) using screw
(11) and nut (10). Tighten sprocket mounting
screw to 25 lb-ft.
(23)
Install left-hand side of agitator pipe assembly
(8) through left side of spreader.
(24)
Inside hopper, secure left side of agitator pipe
assembly (8) to bushing (9) using screw (7) and
new locknut (6).
(25)
Install bushing (5) and cover plate (4) on left side
of spreader using three screws (3), new
lockwashers (2), and nuts (1). Tighten cover
plate mounting screws to 60 lb-ft.
5-22