Secure remaining bracket (22) to spreader using
screw (21), new lockwasher (20), and nut (19).
Fully tighten all transport truck mounting
hardware. Tighten bracket mounting hardware
to 60 lb-ft. Tighten all other transport truck
mounting hardware to 120 lb-ft.
Remove lock pin (15) and pin (16) from each
leveling leg (17). Lower leveling legs and secure
in lowered position with pins and lock pins.
Keep clear of equipment when it is
being raised and lowered. Do not
allow heavy components to swing
while suspended by a lifting device.
Exercise extreme caution when
working near a cable under tension.
Failure to follow this warning may
result in severe injury or death to
Lower spreader and remove lifting slings or
chains from hopper.