TM 5-3895-367-14&P
4-35. BALANCING HANDLE REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools:
Equipment Conditions:
Tool Kit, General Mechanics Automotive
Reference:
Materials/Parts:
Para 4-15
Spreader uncoupled from dump truck.
Two spring pins
a.
Removal.
NOTE
The following procedure is for one
balancing handle. Repeat for second
balancing handle if necessary.
(1)
Loosen thumbscrew (1).
(2)
Remove two spring pins (2) from handle
(3). Pull handle out of bracket (4) and
remove. Discard spring pins.
b.
Installation.
(1)
Slide handle (3) into bracket (4) and
secure with two new spring pi is (2).
(2)
Tighten thumbscrew (1).
4-55