CHAPTER 4
REPAIR INSTRUCTIONS
4-1. General
c. Cleaning. Clean all parts of the roller assembly
This chapter covers the removal, disassembly, cleaning,
in cleaning solvent and dry thoroughly.
inspection, repair or replacement, reassembly, and
d. Inspection. Inspect the roller assembly for
installation of components of the spreader as authorized
cracks, breaks, or damaged shaft.
by the maintenance allocation chart.
e. Repair or Replacement. Repair or replace all
parts that are not able to operate properly.
4-2. Roller Assembly
f. Reassembly. Reassemble the roller assembly
a. Removal.
Remove the roller assembly as
in the reverse order of the disassembly.
g. Installation.
Install the roller assembly as
b. Disassembly. Disassemble the roller assembly
1
Setscrew
3
Roller
5
Lockwasher
7
Bracket
9
Spacer
2
Shaft
4
Nut
6
Bolt
8
Plate
Figure 4-1. Roller assembly
4-1