TM 10-3990-205-12&P
3-8 REPLACE ALIGNMENT ARM AND COMPONENTS
This task covers:
a. Inspection
c. Installation
b. Removal
Tools
Materials/Parts - continued
Tool Kit, General
Eyebolt, 1764 1
Mechanics: Auto
U-Bolt, 215A-22
Rubber Bumper, B-2
Materials/Parts
General Safety Instructions
Grease, MIL-G-10924
Alignment Arm, 214A-9
Pivot Pin, 214A-25
Spring Pin, 215A-22-1
Spring Stop, 215A-22-3
The spreader shall be firmly
Spring, RW-11
supported on timbers or blocks
Alignment Arm Positioning Rod, 215A-50
to prevent possible injury
Eyebolt, MS51937-5
to personnel.
ALIGNMENT ARM POSITION-
1.
ING ROD
Remove the hairpin
a.
(1) and slide the alignment
arm positioning rod (5)
out of the U-bolt (2).
Remove the eyebolt
b.
(3) and lockwasher (4)
from the rod (5).
Remove the nuts (6)
c.
(2), and nuts (8).
NOTE
If the rod (5) is damaged, re-
place the entire alignment arm
positioning rod assembly (3,
4, and 5).
3-15