TM 10-3990-205-12&P
3-8 REPLACE ALIGNMENT ARM AND COMPONENTS - CONT
- CONT
ALIGNMENT ARM ASSEMBLY
2.
Remove the pin (1) and slide the pivot pin (2) out of the mounting brackets (3)
a.
and alignment arm (4).
Remove the pin (5).
b.
C.
Support the alignment arm (4). and pull the control cable (6) to release the
alignment arm (4) from the mounting brackets (3).
Refer to Paragraph 3-7 for procedures and remove the control cable (6).
d.
3-16
