TM 10-3990-205-12&P
3-7 REPLACE CONTROL CABLES - CONT
Remove the nuts (1) and re-
1.
move the cable clamp (2) from
the twist lock cam actuating
cable (3).
Remove the cable clamp from
2.
the opposite end of the cam
actuating cable (3).
Remove the engagement cable
3.
(3) from the twist lock actuat-
ing cam (4).
Remove the nuts (5) and re-
4.
move the cable clamp (6) from
the alignment arm release
cable (7).
Remove the cable (7) from
5.
the spring pin (8) and pull the
cable (7) through the eyebolt
(9).
Thread one end of the replace-
1.
ment cable (3) through the
hole in one end of the twist
lock actuating cam (4).
Position the cable clamp (2)
2.
on the actuating cable (3) and
install the nuts (1).
Connect the other end of the
3.
cable (3) to the opposite end
of the twist lock actuating
cam (4).
Thread the end of the replace-
4.
ment cable (7) through the
eyebolt (9). and the hole in
the spring pin (8) far enough
to install the cable clamp (6).
Position the cable clamp (6)
5.
on the alignment arm release
cable (7) and install the nuts
(5).
3-14
