TM 5-3895-367-14&P
5-4.
AGITATOR REPAIR.
This task covers:
a.
Removal
d.
Assembly
b.
Disassembly
e.
Installation
c.
Cleaning and Inspection
INITIAL SETUP
Tools:
Equipment Conditions:
Shop Equipment, Automotive Maintenance and Re-
Reference
pair: Field Maintenance, Basic, Less Power
Para 4-14
Operator’s platform removed from
Materials/Parts:
hopper.
Dry cleaning solvent (Item 11, Appendix E)
Para 4-38
Agitator drive chain removed.
One cotter pin
Five locknuts
Twenty-one lockwashers
a.
Removal.
(1)
On left side of spreader, remove three nuts
(1), lockwashers (2), and screws (3) securing
cover plate (4) and bushing (5) to spreader.
Remove cover plate and bushing. Discard
lockwashers.
(2)
Inside hopper, remove locknut (6) and screw
(7)
securing
left
side
of
agitator
pipe
assembly (8) to bushing (9). Discard locknut.
5-14
