TM 5-3895-367-14&P
(12)
Remove cotter pin (35) and flatwasher (36)
securing clutch shifting rod (37) to fork (38).
Remove clutch shifting rod through right side of
spreader. Discard cotter pin.
(13)
Remove locknut (39) and screw (40) securing
fork (38) to bracket (41). Remove fork and
flatwasher (42). Discard locknut.
(14)
Remove three nuts (43), lockwashers (44), and
screws (45) securing bushing (46) to side of
spreader. Remove bushing. Discard
lockwashers.
(15)
Loosen setscrews (47 and 48) in collars (49 and
50).
(16)
Slide collars (49 and 50) and clutch (51) toward
center of drive shaft (34). Remove collars,
clutch, drive shaft, and bushing (46) as a unit.
(17)
Remove drive shaft (34) from bushing (46).
(18)
Remove two collars (49 and 50) from drive shaft
(34).
(19)
Remove clutch (51) and two keys (52) from drive
shaft (34).
(20)
Loosen setscrew (53) and remove clutch (54)
and key (55) from traction drive axle (56).
(21)
Remove two nuts (57), lockwashers (58), and
screws (59) securing bracket (41) to right angle
(60). Discard lockwashers.
(22)
Remove two nuts (61), lockwashers (62), and
screws (63) securing bracket (41) to left angle
(64). Remove bracket. Discard lockwashers.
(23)
Remove nut (65), lockwasher (66), and screw
(67) securing right angle (60) to side of hopper.
Remove right angle. Discard lockwasher.
NOTE
If left angle ( 64) requires replacement, right-hand
traction drive wheels will have to be removed
(para 4-41).
(24)
Remove two nuts (68), lockwashers (69), and
screws (70) securing left angle (64) to wheel
bearing support. Remove left angle. Discard
lockwashers.
b.
Disassembly.
(1)
Remove lubrication fitting (71) from each clutch
(51 and 54).
(2)
Remove lubrication fitting (72) from bushing
(46).
5-17
