TM 5-3895-367-14&P
4-17. WIRING HARNESS REPAIR.
This task covers:
a. Removal
c. Installation
b. Connector Plug Replacement
INITIAL SETUP
Tools:
References:
Tool Kit, General Mechanics Automotive
TB SIG 222
Soldering gun
Materials/Parts:
Equipment Conditions:
Insulation tape (Item 14, Appendix E)
Marker tags (Item 13, Appendix E)
Reference
Solder (Item 10, Appendix E)
Para 4-11 Wiring harness disconnected from tow-
Two lockwashers
ing vehicle.
a.
Removal.
(1)
Remove four screws (1) and cover (2)
from each taillight (3).
NOTE
Left-hand taillight has six electrical
leads. Right- hand taillight has three
electrical leads.
(2)
Tag wires (4). Pull wires off terminals.
(3)
At back of each taillight, remove nut (5)
and lockwasher (6) securing ground lug
(7) to stud. Remove ground lug from stud
and remove wiring harness. Discard lock-
washers.
4-32