TM 5-3895-367-14&P
b.
Connector Plug Replacement.
(1)
Remove clamp (8) on shell (9). Slide shell
back from insert (10).
NOTE
For detailed instructions on soldering and unsold-
c.
Installation.
ering, refer to TB SIG 222.
(2) Tag wires (11). Unsolder wires from contacts
and remove
(1)
Install ground lug (7) on each taillight (3)
using new lockwasher (6) and nut (5).
NOTE
(3) Remove shell (9) from wiring harness (12).
Left-hand taillight has three electrical leads.
NOTE
(2)
Push wires (4) onto terminals and remove
Refer to Appendix G for wiring harness fabrication.
tags.
(3)
Install cover (2) on each taillight (3) using four
(4) Slide new shell (9) over wiring harness (12).
screws (1).
(5) Solder wires (11) to contacts in new insert
FOLLOW-ON MAINTENANCE:
(10). Remove tags.
Install taillights on spreader (para 4-11).
(6) Slide shell (9) over insert (10) and secure with
Connect wiring harness to towing vehicle and
clamp (8).
Check operation of taillights.
4-33