TM 5-3895-367-14&P
4-14.
INSTALLING AND REMOVING OPERATOR’S PLATFORM (CONT).
(9)
Remove two nuts (1), lockwashers (2), and
eyebolts (3) securing operator’s platform (4) to
hopper.
(10)
Secure lifting slings or chains to grating inside
operator’s platform (4).
WARNING
Keep clear of equipment when it is
being raised and lowered. Do not
allow heavy components to swing
while suspended by a lifting device.
Exercise extreme caution when
working near a cable under tension.
Failure to follow this warning may
result in severe injury or death to
personnel.
NOTE
Two people should balance
operator’s platform while the third
person operates lifting device.
(11)
Using a suitable lifting device, remove operator’s
platform (4) (125 lb) from hopper and place on
the ground. Remove lifting slings or chains from
operator’s platform.
(12)
Stow eyebolts (3), lockwashers (2), and nuts (1)
in hopper where they mount the operator’s
platform.
(13)
Install transport truck and tongue on spreader
(para 4-12).
4-28
