TM 5-3895-367-14&P
c.
Assembly.
(1)
If necessary, install eight bolts (13) in hub
(4).
(2)
If necessary, tap new Inner (1) and outer
(12) bearing cups into hub (4).
NOTE
Pack wheel bearing cones with grease
in accordance with TM 9-214.
(3)
Pack inner wheel bearing cone (9) with
grease. Install inner wheel bearing cone
and new seal (10) in hub (4).
d.
Installation.
(1)
Install hub (4) on spindle (7).
(2)
Pack outer wheel bearing cone (8) with
grease and install on spindle (7).
(3)
Install nut (6) on spindle (7). Turn hub (4)
by hand and tighten nut until hub drags.
Loosen nut so that hub turns freely.
(4)
Secure nut (6) to spindle (7) using new
cotter pin (5).
(5)
Install cap (3) on hub (4).
(6)
Position hydraulic jack under axle (2) and
raise enough to remove trestle (1).
FOLLOW-ON MAINTENANCE:
• Install transport truck wheel (para 4-19).
4-21. TIRES AND TUBES REPAIR.
Refer to TM 9-2610-200-14 for tire and tube repair.
4-37
