TM 5-3895-367-14&P
b.
Removing Operator’s Platform from Spreader.
(1)
Disengage latch handle (30) from left-hand rail
(28).
(2)
On left side of operator’s platform (4), remove
three quick-release pins (29) and push rail (28)
into frame support (20). Secure in lowered
position using three quick-release pins.
(3)
Remove quick-release pin (27) securing support
bracket (21) to tube (22).
(4)
Remove six nuts (26), lockwashers (25), screws
(23), and four flatwashers (24) securing frame
support (20) to operator’s platform (4). Remove
frame support. Discard lockwashers and stow
remaining mounting hardware on frame support.
(5)
Remove quick-release pin (29) securing support
bracket (21) to rail (28). Swing support bracket
towards center of rail and secure in place with
quick-release pin.
(6)
On right side of operator’s platform (4), remove
five quick-release pins (19) and push rail (18)
into frame support (10).
(7)
Remove quick-release pin (17) securing support
bracket (11) to tube (12).
(8)
Remove six nuts (16), lockwashers (15), screws
(13), and four flatwashers (14) securing frame
support (10) to operator’s platform (4). Remove
frame support. Discard lockwashers and stow
remaining mounting hardware on frame support.
4-27
