TM 5-3895-367-14&P
4-22. OPERATOR’S PLATFORM REPAIR.
This task covers:
a. Disassembly
c. Assembly
b. Cleaning and Inspection
INITIAL SETUP
Tools:
Equipment Conditions:
Tool Kit, General Mechanic’s Automotive
Reference
Torque wrench
Para 4-14
Operator’s platform removed from
Materials/Parts:
spreader.
Dry cleaning solvent (Item 11, Appendix E)
One cotter pin
Two lockwashers
a.
Disassembly.
NOTE
Step (1) through (7) are for right-hand
frame sup- port and rail.
(1)
Remove three quick-release pins (1)
securing rail (2) to frame support (3).
(2)
Remove quick-release pin (4) securing
gate (5) to rail (2).
(3)
Pull rail (2) up and out of frame support
(3). Support bracket (6) will come off with
rail.
(4)
Remove quick-release pin (7) securing
sup- port bracket (6) to rail (2). Remove
support bracket from rail.
(5)
Remove two nuts (8), lockwashers (9),
and screws (10) securing gate (5) to frame
support (3). Remove gate. Discard lock-
washers.
NOTE
All
of
the
quick-release
pins
are
removed the same way. Step (6) is for
one quick-release pin. Repeat as
necessary for the other quick-release
pins.
(6)
Remove
screw
(11)
securing
quick-
release pin (1) to frame support (3).
Remove
quick-re-
lease
pin.
4-38
