TM 5-3895-367-14&P
4-30. CLUTCH SHIFT ARM REPAIR.
This task covers:
a. Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP
Tools:
Equipment Conditions:
Tool Kit, General Mechanic’s Automotive
References:
Para 4-15
Spreader uncoupled from dump truck.
Materials/Parts:
One lockwasher
Two locknuts
a.
Removal
(1)
Remove
locknut
(1)
and
screw
(2)
securing feed roll control lever (3) to shaft
(4). Discard locknut.
(2)
Remove nut (5), lockwasher (6), and
screw (7) securing bracket (8) to throwout
shaft (9). Discard lockwasher.
(3)
Slide shift arm toward center of spreader
to disengage bracket (8) from throwout
shaft (9). Remove
shift
arm
from
spreader.
b.
Disassembly.
(1)
Measure and record position of locknut
(10) on shaft (4). Locknut should be
installed in same position.
(2)
Remove locknut (10), flatwasher (11),
spring (12), bracket (8), spring (13), and
flatwasher (14) from shaft (4). Discard
locknut.
(3)
Measure and record position of collar (15)
on shaft (4). Collar should be installed in
same position.
(4)
Loosen two setscrews (16) and remove
collar (15) from shaft (4).
4-48
