TM 5-3895-367-14&P
4-27. TOOLBOX REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools:
Materials/Parts:
Tool Kit, General Mechanic’s Automotive
Two lockwashers
a.
Removal.
(1)
Open toolbox (1) and remove contents.
(2)
Remove two nuts (2), lockwashers (3),
and screws (4) securing toolbox (1) to
brackets (5). Remove toolbox. Discard
lockwashers.
b.
Installation.
(1)
Install toolbox (1) on brackets (5) using
two screws (4), new lockwashers (3), and
nuts (2).
(2)
Return contents to toolbox (1) and close
toolbox.
4-28. DATA PLATE REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools:
Materials/Parts:
Tool Kit, General Mechanic’s Automotive
Four drive screws
Electric drill
NOTE
This procedure can be used for any of
the data plates. Feed roll chain cover
caution plate is illustrated.
a.
Removal. Drill out four drive screws (1) and
remove data plate (2).
b.
Installation. Install data plate (2) using four drive
screws (1).
4-46
