TM 10-3990-205-12&P
3-3 REPLACEMENT OF TWIST LOCK ASSEMBLY COMPONENTS - CONT
1.
Lubricate the grease fitting (13) with grease, MIL-G-10924, using a grease gun.
2
Lubricate the cam locking rod (1), and clevis pin (5). by hand with grease MIL-
G-10924.
3-4 REPLACEMENT OF GUIDE WHEEL ASSEMBLY COMPONENTS
This task covers:
a. Inspection
c.
Repair
b. Removal
d. Installation
General Safety Instructions
Tools
Tool Kit, General Mechanics: Auto
Shop Equipment Auto Maint: Org. Maint.
The spreader shall be firmly
supported on timbers or blocks
Materials/Parts
to prevent possible injury to
Wheel, Guide - 214A-10
personnel.
Bearing, Bronze, Oilite AA-1334-2
1.
Check to see if the nuts (1).
(3) are loose. Check to see
if the mounting bracket (4)
is loose, bent, or damaged be-
yond repair.
NOTE
The mounting bracket (4) is
not a replaceable part. If dam-
aged beyond repair, a new
bracket will have to be manu-
factured (See Appendix D).
2.
Inspect the guide wheel (5) for
looseness and damage. Rotate
the guide wheel (5) and check
for excessive drag.
3-7