TM 5-3895-367-14&P
NOTE
FOLLOW-ON MAINTENANCE:
Do not overtighten locknut. Pantograph links must
Lubricate coupler hitch housing, adjusting screw,
be free to open and close.
and universal joint (Chapter 3, Section 1).
Raise and lower coupler hitch and check for
(9)
Secure bolt (3) using new locknut (1).
binding. If hitch binds, check alinement of pantograph
links.
5-3. GEARBOX REPAIR.
This task covers:
a.
Disassembly
c.
Assembly
b.
Cleaning and Inspection
INITIAL SETUP
Tools:
References:
Shop Equipment, Automotive Maintenance and
TM 9-214
Repair: Field Maintenance, Basic, Less Power
Materials/Parts:
Equipment Conditions:
One cotter pin
Reference
Two retaining rings
Para 4-37 Gearbox removed.
Two seals
Four gaskets
Twenty-one lockwashers
a. Disassembly.
(1)
Remove 12 screws (1) and lockwashers (2).
Remove cover (3) and gasket (4) from
gearbox (5). Discard lockwashers and
gasket.
(2)
Remove mounting screw (6) from gearbox
(5).
5-7