TM 5-3895-367-14&P
5-3. GEARBOX REPAIR (CONT).
(3)
Remove cotter pin (7) securing throwout shaft
(8) to fork (9). Remove throwout shaft from
gearbox (5). Discard cotter pin.
(4)
Remove fork (9).
(5)
Remove screw (10) and lockwasher (11) from
idler gear (12). Discard lockwasher.
(6)
Remove two pipe plugs (13) from bottom of
gearbox (5).
(7)
Remove two nuts (14), lockwashers (15),
screws (16), and gaskets (17). Remove idler
support bracket (18). Discard lockwashers
and gaskets.
(8)
Remove two retaining rings (19) from drive
shaft (20). Discard retaining rings.
(9)
Slide reverse spur gear (21) toward center of
gearbox (5) and remove key (22) from drive
shaft (20).
(10) Slide forward spur gear (23) toward center of
gearbox (5) and remove key (24) from drive
shaft (20).
(11) Remove drive shaft (20) and two gears (21
and 23) from gearbox (5).
5-8
