TM 5-3895-367-14&P
4-14.
INSTALLING AND REMOVING OPERATOR’S PLATFORM (CONT).
(9)
Remove mounting hardware stowed on right-
hand frame support (10).
(10)
Position frame support (10) for installation on
operator’s platform (4). Ensure that support
bracket (11) enters tube (12).
NOTE
Four screws mount frame support to
back of operator’s platform. These
screws require flatwashers. Two
screws mount frame support to side
of operator’s platform. These screws
do not require flatwashers.
(11)
Secure frame support (10) to back of operator’s
platform (4) using six screws (13), four
flatwashers (14), six new lockwashers (15), and
six nuts (16). Tighten frame mounting bolts to
60 lb-ft.
(12)
Secure support bracket (11) to tube (12) using
quick-release pin (17).
(13)
Fully raise rail (18) and secure In position with
five quick-release pins (19).
(14)
Remove mounting hardware stowed on left-hand
frame support (20).
(15)
Position frame support (20) for Installation on
operator’s platform (4). Ensure that support
bracket (21) enters tube (22).
NOTE
Four screws mount frame support to
back of operator’s platform. These
screws require flatwashers. Two
screws mount frame support to side
of operator’s platform. These screws
do not require flatwashers.
(16)
Secure frame support (20) to operator’s platform
(4) using six screws (23), four flatwashers (24),
six new lockwashers (25), and six nuts (26).
Tighten frame mounting bolts to 60 lb-ft.
(17)
Secure support bracket (21) to tube (22) using
quick-release pin (27).
(18)
Fully raise rail (28) and secure in position with
three quick-release pins (29).
(19)
Couple spreader to dump truck (para 4-15).
4-26
